cancel
Showing results for 
Search instead for 
Did you mean: 

Why ZD1205 does not work with the ZF7363?

andrey_skorobog
New Contributor II
The access point ZF7363 is not connected to the controller ZD1205 (9.10). What to do?
7 REPLIES 7

eizens_putnins
Valued Contributor II
9.10 still supports ZF7363, so it must work. Factory reset AP, than log  to AP through SSH ,  send command: "set director ip xxx.xxx.xxx.xxx" (xxx means ZD IP address, of cause), reboot. Than AP must find ZD. If still unsuccessful, check if it has ZD version software, not SCG version.
This you can check from SSH: "get scg", it will get error if it is software for ZD, and scg setting status if it's SCG version.

andrey_skorobog
New Contributor II
Where to get the SSH-settings to access the access point?
port
login
password

rahul_koul
Contributor
Hello Andrey,

The Ruckus APs use the standard TCP port 22 for SSH and the default user name is "super" and password "sp-admin" for all the APs unless you change it to something else.

Regards,
Rahul

andrey_skorobog
New Contributor II
Nothing helps, what to do?Image_ images_messages_5f91c423135b77e2479800d0_20612c797151a8a0aa8754007caa4a43_RackMultipart2015050225323tmzk-470279c5-10dd-495c-967a-a9f92c4e9189-2001654165.png1430596334Image_ images_messages_5f91c423135b77e2479800d0_d9d5fff8e385d3a5ffc898542262072e_RackMultipart2015050223337rufq-94d3ad4c-8261-48d4-8fc1-2f20294a661b-143023279.png1430596351