cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus ZD Tacacs+

asdasdas
New Contributor III

Hello,

I have Ruckus ZD 1200, I would like to configure Read Only admin access for several persons through Tacacs+ .

Which attribute do I need to sent from Tacacs+ to ZD for this case? 

2 ACCEPTED SOLUTIONS

Ayush_Tripathi
RUCKUS Team Member

Hello @asdasdas 

Please refer the below KB article for the TACACS+ and ZD login

https://support.ruckuswireless.com/articles/000003050

 

View solution in original post

asdasdas
New Contributor III

Thanks @Ayush_Tripathi four your response, I already have Tacacs+ Authentication, but in my case default role for external users is Super Admin. I would like to provide Read Only access for several users. 

View solution in original post

4 REPLIES 4

Ayush_Tripathi
RUCKUS Team Member

Hello @asdasdas 

Please refer the below KB article for the TACACS+ and ZD login

https://support.ruckuswireless.com/articles/000003050

 

asdasdas
New Contributor III

Thanks @Ayush_Tripathi four your response, I already have Tacacs+ Authentication, but in my case default role for external users is Super Admin. I would like to provide Read Only access for several users. 

Hi @asdasdas 
Have you tried reducing the Privilege level (as mentioned in the article) which will provide the read only access?

Oh, yes, you are right. 

Thanks for your help!