Interpreting Spectrum Analysis

[jose_pena_77610]

Hi, I just want to make sure I am correctly understanding the readout of the spectrum analysis feature on ZD. What does a 'bad'/''good' reading look like?

Here's an example from one of our APs



Thank you!

[michael_brado]

Good/bad is subjective.  Your shot shows typcial 2.4g bandwidth utilization, channels 1 and 11 a little hotter than channel 6.
Are you having any AP reboots or client problems on this AP?

[jose_pena_77610]

There are reports of issues at the site that this AP is deployed at, and I wanted to make sure that channel utilization wasn't an issue. 

[irvan_irvan]

Usually you will get issue can't connect to WiFi, this is because issue channel ultilization from device is -65db or above. So recommendation is stay in 1-65db