cancel
Showing results for 
Search instead for 
Did you mean: 

I Can't Define the bandwidth limit

gregory_hougard
New Contributor II
Hello,

When I set the bandwidth limit (of 3 Mbps, for example), I get the following message (see picture in french): The uplink must be between 0.1 and 200.
The ZD1200 is 9.13.1.0 build 11

Image_ images_messages_5f91c3eb135b77e2478e3ead_dd6a6a6f92b81a7a64ebcad40f2b80d1_RackMultipart2016091274931e5c1-7c22f1ea-ae73-4a53-856c-6f044acdc3e8-502422739.png1473690143
9 REPLIES 9

michael_brado
Esteemed Contributor II
Not a known bug that I can find, but 9.13.2 is current MR.
https://support.ruckuswireless.com/software/982-zd1200-9-12-3-0-28-mr3-software-release

gregory_hougard
New Contributor II
Thank you for your reply.
I can not find the version 9.13.2

This is a beta version?Image_ images_messages_5f91c421135b77e24797a4fd_420f537659f2bc054ea7b3bbafb22751_RackMultipart201609138091016c8-9dbec562-62a0-4b7f-a8b3-4bf1891c7a6d-1146044188.jpg1473791979

Oops, please stand by.  Pending release notes finalization.

any good news
Labels