cancel
Showing results for 
Search instead for 
Did you mean: 

H500 cannot discover the smartzone 100

artest_leong
New Contributor II
H500 and smartzone in same vlan. Manually Configure the Controller Address on the AP’s Web Interface already by the AP still cannot discover the smartzone? Wireshark was finding the AP  send a hello packet to smartzone . Is that a region issue or license issue?

H500 version: 104.0.0.0.1347
Smartzone version:  3.0.4.0.667
5 REPLIES 5

hyosang_choi
Valued Contributor
try it using "set scg ip 1.1.1.1"

joshua_lee1
New Contributor III
i believe the sz100 needs to be running 3.4.2 or above (or 3.4.0 with the ap bundle patch) to recognize the H500. I ran into that issue myself before.

Since I upgraded the firmware to 3.2.1.0.193 that H500 success a registry to Smartzone. Thanks so much! 

Oops. I guess I got the firmware wrong. Glad you resolved it!