cancel
Showing results for 
Search instead for 
Did you mean: 

Flapping on Cisco switch in a Ruckus WiFi solution

alejandro_mend1
New Contributor III
Hi

I have a wifi solution with ruckus, controller 1100 and 47 AP ́s. The ap ́s are disconnecting randomly because of some switch ́s ports are up and down constantly.
The wired network is ok and certified,
But there are many logs registered refers to flapping on the switch.
I have disabled the mesh option on the zonedirector. The processor load on the switch has been decreased after that. But the issue keeps alive.

Could it be related with the cisco switch arp table refresh time?
Is it necessary to get similir time of refresh
Or, What could be the problem?
15 REPLIES 15

mat_murdock
New Contributor II
What model of switch are you using?

Mat

alejandro_mend1
New Contributor III
We are using 2960S 24 ports and 48 ports

mat_murdock
New Contributor II
Are the AP's turning off and on? Check their uptime.

Mat

alejandro_mend1
New Contributor III
The AP ́s are on since the last manual reboot. they look ok
Labels