cancel
Showing results for 
Search instead for 
Did you mean: 

Compatibilité de ZoneDirector et AP Zone Reflex

OUATTARASomaye
New Contributor II

Bonjour à toute la communauté! Je souhaiterais savoir quels sont les points d'accès Rukus qui sont compatibles aux Zone Director de la série 1200? En effet j'ai proposé un AP ZoneRelex R610 pour installer avec un Zone Director de 1200 mais le client dit que les deux ne sont pas compatible à son système donc je souhaiterai mieux comprendre cela avec vous. Cordialement

1 ACCEPTED SOLUTION

sarita_shekhar
Moderator
Moderator

Hello @OUATTARASomaye ,

R610 is supported on ZD1200 from the firmware version 9.13.2 MR2 and above. Please check the AP supported list in the Release Notes.

I am sharing the link for the 9.13.2 MR2 Release Notes link:-

https://support.ruckuswireless.com/documents/1218-zoneflex-9-13-2-mr2-release-notes

Also the latest firmware (10.5.1.x) Release Notes:

https://support.ruckuswireless.com/documents/4168-zonedirector-10-5-1-0-176-ga-refresh1-release-note...

Check the guide to verify all the supported AP lists on that version. If your controller is running on any other firmware version, you can download the Release Notes for your respective controller version to verify the same:

https://support.ruckuswireless.com/products/73-zonedirector-1200#sort=relevancy&f:@source=[Documenta...

Regards,
Sarita Shekhar | CCNA | CWNA
Staff Technical Support Engineer,
https://support.ruckuswireless.com/contact-us

View solution in original post

6 REPLIES 6

rabbani_BD
New Contributor

thumbnail_BRAC Ruckus Conttroller.jpg

I want to add Zoneflex R510  to Controller ZD3250(version 10.0)
Please confirm

R510 is supported in ZD version 10.0.x.

It is recommended to go through release notes before every upgrade to check the supported APs.

Regards,

Vasanth Edward