Anyone using Cacti?

[Anonymous]

I am running Cacti for monitoring our network, and would like to monitor the Zone Director as well. What I'm running into is that there are no Cacti templates out there and I'm not comfortable building my own. Has anybody built a Cacti template that monitors the ZD or APs?

[Anonymous]

Hello guys,

I'm looking at doing this same thing through MRTG. However, I can't figure out how to enable SNMP v2 on my AP's that are controlled by a Zone Director.

Anyone able to give me a quick idea of where to set this?

Thanks!
jason

[Anonymous]

Hi Jason,

On the Config Tab, Menu->System you have a "+Network Management" link, at the end of the page.
Just click it and you will have access to enable SNMPv2


You can use the same communities to get SNMPv2 data from APs connected to ZD.

[Anonymous]

Thanks!

[Anonymous]

Hi all,

Is anyone using PRTG to monitor the AP's? We are trying to monitor the number of associated clients on every AP, which OID should we be using from the AD library?

Thanks,
Julius

[Anonymous]

PRTg - no, I don't use this.

For OIDs, please look into the document "Ruckus WirelessTM ZoneFlexTM Access Point SNMP Reference Guide" and a MIB (you have to ask the support for it?)

https://support.ruckuswireless.com/do...

From the guide:

ruckusWLANStatsNumSta OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of associated stations."
::= { ruckusWLANStatsEntry 3 }

regards.