11-29-2022 07:32 PM
My Zone-director 3000 running 10.1.1.0 is stuck trying to download my 7782-E that's running 9.6.0.7.267.
It looked like the latest version for the 7782-E.
The Zone-director 3000 implied that the 7782-E is supported as the name showed up in a config pulldown
on the ZD-3000. It seemed to recognize the 7782-E as a supported AP.
I also noticed a note saying the AP can only be used for UP-LINK. Wondered it that's temporary.
I was hoping to use the 7782 in the MESH. Starting to suspect that MESH wont be supported.
I'm running a mesh in my home and have my neighbor set up with a R700 as a mesh node.
I have a 2Gz dish on my roof and was wondering if I could get better connectivity with
the 2Gz dish and likely an additional 5Gz dish.
Any suggestions?
12-14-2022 10:37 PM
I've tried a few versions of the ZoneDirector 3000 firmware and they aren't working.
This web page
says 10.1.2 should work but I tried two Builds (10.1.2.0.277, and build 212) and neither worked.
Build 212 said the zf7782 isn't supported and Build 277 gets in a look endlessly trying to download.
Was there an original Build 0 or 1 that did work and then it got sacked?
Any chance there is a web page like the one above that has the matrix of Zone Director versions and which access point they support?