Access via MAC
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-09-2017 06:08 AM
How do I enable MAC access from a device on a given antenna connects to the ZD?
4 REPLIES 4
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-09-2017 07:57 AM
Are you asking:
how to allow a client to connect to ZD using MAC address?
If so then create an ACL (access control list) with the MACs.
Then apply that ACL to a WLAN


If I have misunderstood your meaning then apologies.
Max
how to allow a client to connect to ZD using MAC address?
If so then create an ACL (access control list) with the MACs.
Then apply that ACL to a WLAN
If I have misunderstood your meaning then apologies.
Max
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-09-2017 11:21 AM
EscreThanks for listening. That's what I was looking for.
There are 04 antennas installed, do you have any way to separate the clients to access by certain antenna?
Example:
Client 01 and Client02 on antenna 01
Client 03 and Client 04 on antenna 02va uma resposta
There are 04 antennas installed, do you have any way to separate the clients to access by certain antenna?
Example:
Client 01 and Client02 on antenna 01
Client 03 and Client 04 on antenna 02va uma resposta
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-09-2017 12:35 PM
Yes you can do this and when set up will work but it is another level of complication. If you really need to have specific clients connect to specific APs (antennas) will provide screenshots in morning when I get back in to work.
previously:
create ACL
create 2 WLANs
add MAC to ACL
assign ACL to WLAN
=====================
now:
create 2 WLAN groups
add relevant APs (antennas) to relevant WLAN group
assign relevant WLAN (ssid) to WLAN group
test!
When you have done it it starts to make sense but initially seems overly configured. This is because the functionality has to scale for much more diverse, highly populated and complicated situations than just a few APs/clients
previously:
create ACL
create 2 WLANs
add MAC to ACL
assign ACL to WLAN
=====================
now:
create 2 WLAN groups
add relevant APs (antennas) to relevant WLAN group
assign relevant WLAN (ssid) to WLAN group
test!
When you have done it it starts to make sense but initially seems overly configured. This is because the functionality has to scale for much more diverse, highly populated and complicated situations than just a few APs/clients
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-10-2017 09:06 AM
Some pics from ZD might help (or not).
[With only a few devices it seems madness but when you have dozens or hundreds breaking APs and WLANs into groups gives you much greater control]
ZD gui, Configure, Access Points:
Create AP (antenna) groups

then add APs to that new group

Create WLANs

and add them to WLAN groups

So now you can go back to the AP group and select which WLAN group it will use - greyed out box at bottom.
AP groups contain APs and use WLAN groups to know what WLANs they should broadcast.
WLAN groups contain the individual WLANS and they use ACLs to allow clients by MAC. Simple, tee, hee. I need to rest.
Hard to get your head around but it all makes sense...eventually.
Max
[With only a few devices it seems madness but when you have dozens or hundreds breaking APs and WLANs into groups gives you much greater control]
ZD gui, Configure, Access Points:
Create AP (antenna) groups
then add APs to that new group
Create WLANs
and add them to WLAN groups
So now you can go back to the AP group and select which WLAN group it will use - greyed out box at bottom.
AP groups contain APs and use WLAN groups to know what WLANs they should broadcast.
WLAN groups contain the individual WLANS and they use ACLs to allow clients by MAC. Simple, tee, hee. I need to rest.
Hard to get your head around but it all makes sense...eventually.
Max

