cancel
Showing results for 
Search instead for 
Did you mean: 

ZD1100 Unable to Active Mesh Mode on AP's

anthony_gazdovi
New Contributor II
Hi ,

I am running ZD1100 with Firmware Version 9.8.2.0 and I am trying to Enable Mesh Mode on the AP's that my ZD is managing BUT all the documentation states to go into each AP and enabled the "Mesh Mode" through the "Advanced Settings" but they those "Advanced Settings" for each AP are not on the ZD interface. Any help?
15 REPLIES 15

gerard_3770286
New Contributor III
What model of AP's are you trying to mesh ?

max_o_driscoll
Valued Contributor
to be clear
in ZD gui...
configure
access points
select one and choose edit (at right).

scroll down and should see...(but you don't)?

Image_ images_messages_5f91c430135b77e2479ad143_39af6ec42876430a54674a98174c39c3_RackMultipart201506168363uwhas-6e5bf3c3-533e-4c07-83f2-8fe850ba17db-1139367654.jpg1434466387

That's right I do not have that section "Advanced Options"

Image_ images_messages_5f91c476135b77e247aa032e_a1d24c529dbf262d9ab591cd15d9fd50_RackMultipart20150617123801jkw-43d4df38-9423-4e63-9270-11faab58ffbe-229777606.JPG1434518396