cancel
Showing results for 
Search instead for 
Did you mean: 

Limit dB signal for access

elias_pereira_9
New Contributor
Hello,

We have a ZD1106 controller and some r600 zoneflex. I would like to know if it is possible to configure a limit on the signal power in the access of the users?

For example. If a user is too far from the AP with a -70 dBm signal he will not be able to connect or the AP will disconnect the user.

It is possible?
3 REPLIES 3

michael_brado
Esteemed Contributor II
The BSS min-rate can tighten the circle of coverage required for user connections,
often used in conjuction with OFDM-only (no 802.11b clients allowed).

https://support.ruckuswireless.com/answers/000001657

elias_pereira_9
New Contributor
Michael,

Thanks for the answer!!!

You're most welcome!