04-06-2022 12:11 PM
Zonedirector 1200 with R710
When we enable dynamic vlan on our wireless alan the winodws clients will randomly loose connection. It will not reestablish until you turn off the wifi and reconnect it. The windows workstations connect with the computer account credentials.
If we disable dynamic vlan and and device policy the clients stay connected.
Radius has the correct settings to assign the vlan to the the clients. And the roles are configured in zonedirector.
04-06-2022 02:06 PM
Dear Jcampbell,
may you please let us know which firmware version you run on ZD1200?
Br,
Mark.
04-07-2022 04:30 AM
ZD1200 is at 10.2.1.0 build 75
04-07-2022 04:34 AM
To clarify what I mean by loose connection the wireless shows its connected to the ssid but webpages will not load and I cannot connect remotely the the machine with sccm remote control until the wifi is disconnected and reconnected.
04-08-2022 03:52 AM
Dear Jcampbell,
sorry for late reply. I do not find something in the release notes about this issue. But I knew there where issues with dynmic vlans. Maybe you could upgrade 10.2.1.0.212 and test again. There are some releases in between.
10.2.1.0.75 (10.2 MR1)
• 10.2.1.0.79 (10.2 MR1 Patch1)
• 10.2.1.0.129 (10.2 MR1 Refresh 1)
• 10.2.1.0.135 (10.2 MR1 Refresh 2)
• 10.2.1.0.147 (10.2 MR1 Refresh 3)
• 10.2.1.0.159 (10.2 MR1 Refresh 4)
• 10.2.1.0.183 (10.2 MR1 Refresh 5)
• 10.2.1.0.187 (10.2 MR1 Patch)
• 10.2.1.0.192 (10.2 MR1 Refresh 6)
Hopefully this resolves your issue.
Br,
Mark.