cancel
Showing results for 
Search instead for 
Did you mean: 

Client Traffic Logging - ZD1106

andr_vila_nova
New Contributor III
Hi,

    We have a ZD1106 (v. 9.9.0.0 build 216) with various access point ZoneFlex 7372, I configured the "Log Setting" on ZD so that I could receive routing traffic, as IP / Port Source, IP / Port Destination, MAC address, AP MAC address, however, I didn't receive it, just other logs. Is it works on this firmware as well as the other or just version 10.2?


 Image_ images_messages_5f91c3f6135b77e2478fe6f5_b24d893a3dca76a8b3cfdee0f135e25a_RackMultipart2019111939491xoxl-eb0b4924-22be-4b19-9f04-747588249c9a-1679129553.PNG1574183496

   In these guides below I couldn't find anything about it.

     Ruckus Wireless ZoneDirector Release 9.9
     Ruckus Wireless ZoneDirector Release 9.8
     Ruckus Wireless ZoneDirector Release 9.10
     Ruckus Wireless ZoneDirector Release 10
     Ruckus Wireless ZoneDirector Release 10.1

   Only in this guide below, I read about it, but I need to know for sure before upgrade the firmware.

     Ruckus Wireless ZoneDirector Release 10.2

Thanks a lot.


















9 REPLIES 9

Hi Syamantak,

I don't why, but some article I can't read, anyway, is there any possibility of using "Client Traffic Logging" in the available firmware?

Because I need this info, as IP / Port Source, IP / Port Destination, MAC address, AP MAC address in to the log.

Image_ images_messages_5f91c495135b77e247afb89f_b40da2d2d06ab2d519ff27eeba313f6e_RackMultipart2019112212046316w-91ff8cca-d399-4f69-b46f-5ce0b08fa453-1524494575.PNG1574430021








Hi Andre,

I just checked and able to open the article on our support site. Please copy paste the link to browser's incognito window and try again.

For your help, I am adding two screenshots of the article here. Please refer and confirm if it solves your problem.

Image_ images_messages_5f91c495135b77e247afbb03_ba9e4c52f6b3221aa53941c6c20f564a_RackMultipart20191122424591suq-ee9cab79-91ac-4923-b29d-e6cef85b4df1-1473339796.JPG1574432775Image_ images_messages_5f91c495135b77e247afbb03_24735da65a033a1500144e5c0a14160a_RackMultipart20191122756201rcd-14432e96-b59e-4252-94a4-a30ad6de6170-589182190.JPG1574432784
Regards,
Syamantak Omer
Official Rep | Staff TSE | CWNA | CCNA | RASZA | RICXI

Don't matter what I do, I can't have access to this article, but I really appreciate your support, but I had already applied it at another time, but I was unsuccessful, I will validate a little more.

Hi Andre,

The above steps should help you to get the client details, if you still have issues, please contact our Support team on the below link.

https://support.ruckuswireless.com/contact-us

Regards,
Sanjay Kumar


Hi Sanjay,

 Seems that I received some logs about this, as you can see below, but I need more than that, what I need is "IP/Port Source, IP/Port Destination" from those sites visited for the user, Is it possible ?
  
   stamgr_send_log_v4():operation=add;seq=13;sta_ip=IP LAN;sta_mac=MAC ADDRESS;zd/ap=MAC ADDRESS/MAC ADDRESS;sta_ostype=Android;sta_name=USER;stamgr_handle_admin_auth_sta_request