(code 2) Failed in association procedure

[eduardo_rivas]

What does this mean? I am using a R510 with unleashed. Not sure what I did or if anything. I cannot surf the internet when connected to AP but the unleashed site shows connected to internet.

[sanjay_kumar]

Hi @eduardo_rivas 

(code 2) Failed in association procedure means "Previous authentication no longer valid".

Make sure you are using the right credentials for connecting the SSID.

Is this the first time you are connecting the client to this SSID?

Is this a normal SSID or Guest/Hotspot SSID?

Can you try creating a new WPA2 SSID and see if it works?

[eduardo_rivas]

@sanjay_kumar

I figured it out. I changed it from standalone to unleashed but for some reason the firmware did not take. I did a CLI reset and started over. The menus are working better and I can access the internet. Just something screwy happened. I think the AP was not previously reset correctly and old settings were stuck causing the firmware change to be faulty.  

[sanjay_kumar]

Hi @eduardo_rivas 

Glad to hear that the issue is resolved.

Please feel free to let us know if you need any assistance.

Regards,

Sanjay Kumar