cancel
Showing results for 
Search instead for 
Did you mean: 

Wi-Fi Calling on Unleashed

daniel_m
Contributor

First I just want to say thank you for adding this to Unleashed!  I have configured a Profile for this and enabled it on a WLAN, but I am not seeing my Wi-Fi Calling Client, even after refreshing, on the Summary tab even though I’m currently on a Wi-Fi Call.  How do I go about troubleshooting this?

Thank you!

12 REPLIES 12

Sorry guys, I thought it's something everyone would know.  🙂

Reference below:

https://docs.arris.com/bundle/unleashed-200.9-commandref/page/GUID-98BB49DE-3E1E-48F9-BDAF-764A42BEE...

To access the AP CLI from the Unleashed Master (controller) CLI, use the following command: 

ap-mode

ruckus# ap-mode
You have all rights in this mode.
ruckus(ap-mode)#

daniel_m
Contributor

Thank you again Tony!

I was able to connect to the relevant member AP and see the following in real-time:

rkscli: get rflow
| flag | age | MAC1  MAC2 | IP1                 IP2      | proto|PORT1 PORT2 | flow ID | 1tx  1rx | Deny |     QoS    |  R/L |    URL    |         APP         | 2tx  2rx  | retry | UTP  | ifname
...
| 4C0060D |   0 |9D9E  1EDA| 208.54.37.80  198.51.100.200|UDP| 4500 42670 | 25808    | 22800    2528   | ALLOW | 2  3  1  3 | -1 -1 |  -1  |      T-Mobile       |2528 22800  | 3|0 | wlan34   eth0

We look good 😉 !

raymond_lau_740
New Contributor III
For Verizon, I believe the correct edpg dns is wo.vzwwo.com. At least that works for me. I got it via watching traffic with tcpdump and also found it referenced on a competitor's wifi calling setup kb.