cancel
Showing results for 
Search instead for 
Did you mean: 

Unleashed mode Master AP

roberto_constan
New Contributor III
Hello everybody, Does any one could tell me how can I change a master AP when my network is working in unleashed mode?
4 REPLIES 4

michael_brado
Esteemed Contributor II
Unless you're using it in Gateway Mode, just Unplug it, and your other APs will select a new Master AP.

roberto_constan
New Contributor III
Thanks for your reply Michael, it is not in gateway mode, they are just working as access point with static IP address which is also a problem to open the GUI because it just takes me down.

michael_brado
Esteemed Contributor II
I recommend using a Management IP address, that will always take you to the current Master AP.
Works well with static IP address APs.

roberto_constan
New Contributor III
But in that case, i will not be able to access the other aps?