Unleashed issue

[Tech]

Hello, I am trying to join an AP R610 and R650 in unleashed mode, but for some reason, the second access point (not the master) always appears as disconnected, I try to ping between them and it is not successful, both are in the same network, there are no firewalls or anything that is blocking the traffic, I am using my PC when I ping both is satisfactory, has anyone had this problem?

Note: the access points have the latest firmware and I did a factory reset on both

[Squozen]

IP conflict with another device on the network? That’s all I can think of. Maybe your PC is actually pinging something else when you’re testing. 

[Tech · Accepted solution]

Thanks for your help, I fixed it, there was some problem in the CAM table on the switch (MAC - Layer2), and now both APs are working. 👍