cancel
Showing results for 
Search instead for 
Did you mean: 

Unleashed AP approval issues with 200.2.9.13.186

JJW2009
New Contributor III
With previous firmware versions I could enable/disable automatic approvals.  I just updated to 200.2.9.13.186 and it seems the approval option is permanently enabled, you are not able to click the option.  Has anyone else noticed this?  It's caused some minor headaches when running multiple APs on the same network that I did not want to be connected together.
17 REPLIES 17

After harassing over this for a couple of days, i ended up managing my two Unleashed networks, by adding the corresponding switchports untagged to different VLANS and different IP subnets and got it done that way.

Thanks,

ruben_trucon
New Contributor II
Is it possible to remove an "Answered"-tag from a thread, or should I make a new thread for this issue?

michael_brado
Esteemed Contributor II
No, but you can contact Tech Support or your SE and ask for a Field Request (FR) with your business case for PLM to consider.