Did you know...? If you use your R510 AP in Standalone/Solo AP mode, you can configure
your AP to be a two port router? It's pretty slick, as you let one Eth port be your ISP WAN
inbound, and the other Eth to your local LAN (untagged), so a switch (PoE or otherwise) and
any wired devices you want on your network. Then you create an internal network (NAT) for
your wireless clients, and specify this when you define your WLAN/SSIDs on 2.4g/5g radios.
Have a read through the 104.0 Solo AP User Guide for more detail. You may need to switch
your firmware if you don't have Solo code today.
https://support.ruckuswireless.com/documents/1137-zoneflex-indoor-ap-104-0-user-guide https://support.ruckuswireless.com/software/996-zoneflex-r510-indoor-ap-104-0-0-0-1347-ga-software-r...