cancel
Showing results for 
Search instead for 
Did you mean: 

R750 setup help

TB512
New Contributor

Hi! Bought a couple R750's and I'm having trouble getting them setup. Did the initial Wifi setup, but it never changes to the new broadcast SSID, just remains the Configure.Me-xxxxxx SSID.  I'm just trying to get the 2 working as a mesh eventually. Any help would be appreciated.

3 REPLIES 3

syamantakomer
Community Admin
Community Admin

Hi @TB512,

Could you confirm what firmware version is running on these APs.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI

RUCKUS Networks, CommScope!

Follow me on LinkedIn

"200.10.10.5.229"

sanjay_kumar
RUCKUS Team Member

Hi @TB512 

Bring up just one AP as Master and configure it, once it is Up then added the Second AP to the Master.

1. Configured the Master AP with all the SSID settings and other settings.
2. Ensure that it is broadcasting the SSID.
3. Reboot is just to ensure that it is holding the config
4. Once done, then you can add the second AP (Member AP) either by connecting to the same network (it will detect the Master automatically or by using the CLI command on the Member AP "set director ip x.x.x.x" and reboot.

How to reset the AP to factory default:
https://www.youtube.com/watch?v=vFD_ByQWGH0

How to configure the Unleashed Master:
https://www.youtube.com/watch?v=j8I5aVwMNMg

Adding the Member AP to Master:
https://www.youtube.com/watch?v=Fe15AP660Ek

Configure Zero touch Mesh config:
https://www.youtube.com/watch?v=f1dh_q5ZTT4

Let me know if you still face the issue that the AP is not holding the config.
Some screen shots of how you are configuring and saving the config will be helpful.