RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
05-18-2025 11:25 PM
I'm setting like this
R750
IP : 192.168.90.5
Netmask : 255.255.255.0
Gateway : 192.168.90.1
DNS : 8.8.8.8
Vlan : 1
Dedicated Master mode
R550
IP : 10.193.0.10~26
Netmask : 255.255.255.0
Gateway : 10.193.0.1
DNS : 8.8.8.8
Vlan : 1
This setting is activation and working.
Is it possible?
05-26-2025 09:48 AM
Hello @Pinggo,
The Dedicated mode is used to replace ZD1200, one of the differences is to support"L3 discovery".
User DHCP OPTION 43 or auto discovery in the same subnet by default
Configure the master’s IP or domain name
Set the master IP in AP CLI
The member AP should be reachable to the dedicated master IP address in order for it to join the unleashed network.
Please refer to the document below.
