R710 wireless

[twistsd]

I am new to using RUCKUS products. I have been loaned an R710 to evaluate if it is suitable for our needs. I have loaded the latest version of RUCKUS Unleashed (MR1) https://support.ruckuswireless.com/software/3389-ruckus-unleashed-ap-200-12-10-105-100-mr1-software-...

After installing the software whilst still connected via an ethernet cable I went through the setup process and names the SSID, but the led's are not going green on the AP and the network is not showing up as an option to connect to. Am I missing something?

Many thanks

[Squozen · Accepted solution]

When you log into the admin page does it show an active wireless network?

[twistsd]

Thanks for your reply.

It turns out that the PoE injector that I was using was not supplying sufficient power to the AP.