R310 Certificate Problem

[kieran]

Hi

I recently installed a new certificate on my R310, and since installing the certificate I can no longer access the admin UI on the device. I’ve tried factory resetting the AP as it hasn’t cleared it. Does anyone know of a way of restoring the self signed certificate? 

Thanks!

[sanjay_kumar]

Hi,

Try below steps:
set https disable
set http enable

And then access the AP from the IP address http://ipaddress

[kieran]

Hi 

Thanks, but still trys to redirect to the https version of the site 😞

[BobaEnjoyer]

I'm still new to the CLI, but I just found:

no web-portal-force-https-redirection
                       Disables web portal force HTTPS redirection.

It's under "config" in the beginning, right after you "enable"

So:

1.  SSH in.  Log in as your admin account.
2.  enable
3.  config
4.  no web-portal-force-https-redirection
5.  exit

(exit saves changes in that menu.  abort or quit will cancel changes and go back to the previous menu.)

Maybe this will work.

[kieran]

Sends me back to https site still 😞

It shocks me that there is no way to reset the SSL certs via CLI as most other equipment I've used allows you to do it

[sanjay_kumar]

Hi,

Can you try converting the AP to Standalone version from CLI upgrade and then see if it helps?
https://support.ruckuswireless.com/articles/000001551