cancel
Showing results for 
Search instead for 
Did you mean: 

Not enough electricity power provided with AP warning

rajiv_kumar
New Contributor III

I have the issue on AP R710, 720, 750. Not enough electricity power provided with AP warning

issue. The issue started after updating the unleashed to 200.10 firmware. The issue is on the unleashed firmware 200.8 to 200.10.

On the firmware 200.7 didn't get the warning of "Not enough electricity power provided with AP".

Tried several PoE switches and PoE injector but it doesn't resolve. only after downgrading the unleashed firmware to 200.7 its getting resolve. pls suggest.

16 REPLIES 16

paul_courbis_de
New Contributor II

Hi

It can take a few minutes for the AP to suppress this warning. Try waiting some times...

Regards

rajiv_kumar
New Contributor III

Hi paul,

No, The AP didn't suppress the warning in Unleash FW 200.8 to 200.10.

paul_courbis_de
New Contributor II

Strange. Did you check your POE injector or POE switch to check it's powerful enough ? the R7xx need more power than the other Ruckus AP. 
I had to buy a GRT -480125A 48v Power Supply (60W)

rajiv_kumar
New Contributor III

Yes, Done every thing. I had tried more then 20 PoE intjector and switches. 

The issue is not with any specific AP it with all the APs (R710, 720, 750 etc) working on unleashed firmware 200.8.x to 200.10.x