Not enough electricity power provided with AP warning

[rajiv_kumar]

I have the issue on AP R710, 720, 750. Not enough electricity power provided with AP warning

issue. The issue started after updating the unleashed to 200.10 firmware. The issue is on the unleashed firmware 200.8 to 200.10.

On the firmware 200.7 didn't get the warning of "Not enough electricity power provided with AP".

Tried several PoE switches and PoE injector but it doesn't resolve. only after downgrading the unleashed firmware to 200.7 its getting resolve. pls suggest.

[paul_courbis_de]

Hi

It can take a few minutes for the AP to suppress this warning. Try waiting some times...

Regards

[rajiv_kumar]

Hi paul,

No, The AP didn't suppress the warning in Unleash FW 200.8 to 200.10.

[paul_courbis_de]

Strange. Did you check your POE injector or POE switch to check it's powerful enough ? the R7xx need more power than the other Ruckus AP. 
I had to buy a GRT -480125A 48v Power Supply (60W)

[rajiv_kumar]

Yes, Done every thing. I had tried more then 20 PoE intjector and switches. 

The issue is not with any specific AP it with all the APs (R710, 720, 750 etc) working on unleashed firmware 200.8.x to 200.10.x