How to stop APs in unleashed network from automatically turning off?

[epicurean]

After updating the firmware in my unleashed network ( 3x R610 and 1 x H510) to the latest 200.13.6.319, the 3 R610 have intermittenly been turnining on and off.  Previously, my master AP WIFI is usually off, and so is the H510 WIFI,and the WIFI coverage is great with just the 2 R610 (attic and ground floor). The master AP is on the 2nd floor, and the H510 is in the masterbedroom -on the 2nd floor as well.

Now the R610 in the attic does not come back on, and the H510 takes on a lot more clients on WIFI and the R610 on the ground floor comes on and off. How do I revert back to the original AP arrangement or at least prevent the Attic and Ground floor APs from being turned off?

Thank you

[epicurean]

I got kicked out of the ssh, and cannot log back in anymore

[epicurean]

Managed to login again

Get election

The local AP's ip address is 192.168.0.21, Election role is member, Fix role is NO, Debug level is ERROR, Prefer master is 60:d0:2c:09:b5:40, Prefer Second master is 00:00:00:00:00:00, Dedicated Mode Enabled: NO

MacAddress IpAddress Role CfgID StaRate FreeMem MeshEna MeshNode MeshNodeType Model ActiveVer BackupVer SysTime BoardType UpTime LastSeen
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
8c:fe:74:13:60:d0 192.168.0.20 member 88989 45 296724 0 0 0 R610 200.13.6.1.319 200.12.10.5.234 0 r710-5-30-4bss [1 day 3 hrs 14 mins 15 secs] [Mon Feb 27 18:45:10 2023]
44:1e:98:00:d3:40 192.168.0.23 member 88989 56 331540 0 0 0 H510 200.13.6.1.319 200.12.10.5.234 0 r510-5-31-4bss [4 hrs 36 mins 40 secs] [Mon Feb 27 18:45:07 2023]
8c:fe:74:13:61:f0 192.168.0.21 member 1 63 309616 1 0 1 R610 200.13.6.1.319 200.12.10.5.234 0 r710-5-30-4bss [2 mins 21 secs] [Mon Feb 27 18:45:10 2023]
60:d0:2c:09:b5:40 192.168.0.21 master 88989 52 229652 0 0 0 R610 200.13.6.1.319 200.12.10.5.234 94706249 r710-5-30-4bss [1 day 3 hrs 39 mins 39 secs] [Mon Feb 27 18:45:09 2023]

[epicurean]

3. No

4. Yes

5. I have set the Master AP to the one in the Attic as AP2 is disconnected

[Vineet_nejwala]

Hi @epicurean 

Can you share support log of the APs to see if the APs are rebooting due to some error ?

 Unleashed Cluster --> Access Points --> Select that AP --> On Right panel you will see "Show system info" , click on that it will show "Save log" click on that you will be able to download the AP support log file.

Best Regards

Vineet

[epicurean]

I am unable to set director IP as suggested. trying to ssh into the AP is hit and miss. Sometimes I can log in as super, sometimes it bumps it off