Convert r500 to unleashed

[roguedevice]

Hi, I purchased two r500 AP's and I'd like to convert them to unleashed. However, I can't login to the AP. It keeps saying webpage not available. Any help is greatly appreciated. Thank you.

[michael_brado]

If you purchase Unleashed 9U1 part number APs, the firmware will advertise a Configure.ME-XXYYZZ ssid to connect to for management.
If you have two 901 ZoneFlex R500s, you may have to factory default to get access to the WebUI (depending on if they were ZD managed).
If you ever need to RMA one of these APs, you will receive a ZoneFlex R500 again.

[roguedevice]

Thanks. I don't have zonedirector, if that matters. I also did a hard reset, but still no luck.

[jason_sparrow]

If you have done a hard reset, I would guess you now just log in with the factory set IP address

[roguedevice]

192.168.0.1, correct? I always get webpage not available.