Is it possible to continue a wired network from a R500 mesh node?
I am running a unleased r500 mesh network with the main node connected to a router with internet. I would like to add a switch to a mesh node on the other side of our building to add some computers (without wifi) on that end.
yes - this is doable however you may run into issue with regards to users behind the switch not receiving IP through DHCP. You can resolve the issue with commands mentioned in below Post
I will test with a few static addresses first. I’ll look up the debug mode and scripts needed to change the directed dhcp setting when Dhcp is really needed on the other end. It’s my home network, not much experience with such extended ap’s 😉