Client disconnections after 200.19.7.11.283 upgrade, disabling "force DHCP" seems to fix it

[seanm]

We have a Ruckus R750 running Unleashed.

Everything was fine with 200.18.7.101.244, then we updated to 200.19.7.11.283 and many people were reporting disconnections and/or unstable connections.

Turning the "force DHCP" option from ON to OFF seems to have fixed it.

Anyone else have this same issue?

Sean

[robert_berki]

This unleashed update eta has come and gone, any idea on upcoming unleashed update time frames?

[sanjay_kumar]

Hi @robert_berki,

ETA is early next week.

[username]

I updated to the new Unleashed version released today. Still buggy, had so many issues, disconnections and slowdowns, just like the last major update. Reverted to 200.18 and all my issues disappeared again immediately. 

[sanjay_kumar]

Hi @username,

Could you please let us know the details on the issue you have faced so that we can check internally.
We still have your config backup, we can check in our lab but need to understand the issue behavior you are facing.
Could be a new issue, but need to verify and your information will be very helpful.

The issue method is to get the logs directly from your setup, but I'm not sure if you are ok to upgrade to 200.19 MR.

[username]

willing to give anything a try at this point, if you could send me the instructions for what you want I can give it to you. If you want any logs too, I can provide that as well. Just would like this issue to be sorted out at this point.