I was able to update a R650 (single AP) from controller default Firmware to Unleashed in the past.
Currently I bought a brand new R750 that does not have Unleashed.
1. I can't seem to access the 192.168.0.1.
2. I do have the computer connected to directly to the 2.5Gbs via a 30W PoE/PoE+ Gigabit Injector.
3. I do have the Network Card static IP Set to 192.168.0.5
4. It says it's connected.
5. I've reset the AP 3 times.
6. I also see the Configure.me-0DC9B0. I tried connected but it required a passkey. I entered the serial number and it connected but said internet not connected.
Please help! I'm happy to command line into this AP as well but I would need step by step instructions. Any help would greatly be appreciated.
