cancel
Showing results for 
Search instead for 
Did you mean: 

2.4 vs. 5GHz solo vs. unleashed?

bdillard
Contributor II
Hello,

I just switched my R310 from solo to unleashed to see what the configuration would look like.  On the firmware I was using, the 2.4 and 5ghz were separate SSIDs - I didn't see a way of making a single one that was both.    I know on some manufacturer APs it just switches depending on the signal.   When I set it for Unleashed, I didn't see a separation any more.  Is it both 2.4 and 5ghz on the same SSID?
4 REPLIES 4

michael_grant_6
Contributor II
It’s currently not supported in current Unleashed firmware to broadcast separate 2.4/5GHz band SSIDs.

Thanks - so will my computer automatically be on 5GHz if the signal is strong enough or is it random or will it ignore the 5GHz?

It’s a client side decision, but yes your devices should connect to 5GHz if the signal is strong and interference is minimal. Apple devices for example will favor 5GHz and on macOS always defaults to 5GHz as long as the RSSI is -68dBm or better.

Really good info - thanks!