RUCKUS Forums - To Be Moved - Page 90 - CommScope RUCKUS Community Forums

Ruckus Wireless

|

To Be Moved

Forum Posts

Sorted by:

ASK the Pack

Changing WLAN name

We've got the SmartZone 100 and I'm wondering if changing the name of the WLAN (not the SSID) necessitate any other changes like in the WLAN Groups? Our original setup has changed during our rollout and I would like to rename the WLANs to better re...

R710: "PoE+" injector still gets recognized as 802.3af power

For fun, I tried buying a PoE+ injector to unlock full transmit power on 2.4GHz on my R710. I found that even with an injector that's advertised to be PoE+, the power mode still says 802.3af, not 802.3at.Looking at the support article KB-5005, it loo...

Downstream slower than upstream

I am seeing downstream speeds (from AP to wireless client) about 20-25% slower than upstream traffic (wireless client to AP). I am using iperf3 to do this testing. Is this normal?I have a test setup since we are right in the middle of a comparison of...

Mesh & 802.1x

Hi,I am looking at turning on Mesh as I have an area I cant get to with wires, the warning about 802.1x pops up when I go to enable it. Does 802.1x stop working for the entire Ruckus ZD system of just for the APs I allow to use Mesh? My system is hea...

AP versus zd authentication

Hi all,Does anyone know if you can specify that Radius authentication be done by either the ZD controller or each individual AP ?I can't seem to find anything on it in the forums... It's a bit more work to set up for individual AP's on the NPS serve...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1