I just purchased an unleashed R600 for my home and cannot seem to get it to work. My current AP is an older Apple Airport Extreme that had this physical hookup
Cable Modem<---->Airport Extreme<---->Netgear switch
The Airport Extreme acted as the DHCP server on my home network. I currently have the Ruckus plugged into my Netgear switch and the cable modem plugged into my Netgear switch. When I work my way through the Ruckus wizard I choose static IP for the R600 since I want it to now be my DHCP server for the network. Once configured and I join my newly created network, I get an IP address on my MacBook Pro from the Ruckus but no internet connectivity.
I have been working on this for several hours with a few resets on the R600 in between with no luck. Any idea what the problem is?
I have even tried the R600 inline with a connection similar to my Airport Extreme. I used both ethernet ports on my R600 like this:
Cable Modem<---->R600<---->Netgear switch
What is interesting is if I leave my Airport Extreme connected an active and just hang the R600 off my Netgear switch, all works fine. In other words, if I use the R600 for connectivity and the Airport Extreme for DHCP I can get internet access. I want to use the R600 for DHCP though