Showing results for 
Search instead for 
Did you mean: 

How do you get the access points to use Option 43 for SCG?

New Contributor II
I was able to set up DHCP option 43 with our new SCG IP address, and I see one of the APs now lists it properly in the server list acquired from DHCP. However, it still points to the old IP address. How do I get it to use the IP from DHCP instead of the manually configured IP?

New Contributor II
To be clear, the AP now says something like

Server list:
Server list from DHCP:

I need it to connect to the server list from DHCP, not the server list. But it doesn't appear to be doing that.

Contributor III
if there is a static SCG entered into the AP manually, best to factory default the AP which will clear out static config.