cancel
Showing results for 
Search instead for 
Did you mean: 

Block Android devices in one SSID

juan_6469136
New Contributor II
Hi, I have a 1100 Zonedirector with 10 7772 APs with WPA security.

I want to block only the Android devices, but When I make a new "Device Access Policy" in Configure-> Access Control menu: I created new policy with this optións:

Default Action if no rule is matched: Allow all by default
Order Description OS/Type Type Uplink Downlink VLAN Action
1 Android Deny DISABLE DISABLE

And now I go to configure->WLAN and choosing the SSID and in advanced option I active the Device Policy called "Block Andoid Devices".

I can see that the Android Devices are Blocked: Authorized (Blocked), but not only Android devices, this is the problem. There are many other devices With Windows 7 that are blocked. (The zonedirector can ́t read the Operatim System od the the device, it ́s blank).

PD: The 1100 Zonedirector is in 9.6 firmware. Thanks.

Image_ images_messages_5f91c3e4135b77e2478cde14_f6221815b5478e51328acae4d8749189_Ruckus1_inline-63653fde-35cd-46a9-b9ba-160eea8173f0-284223720.png1396264196 Image_ images_messages_5f91c3e4135b77e2478cde14_722256f593669be7f1fab4a0ef544f85_Ruckus2_inline-1bc7a663-b07d-4dd8-914b-22fcc1484241-1753831860.png1396264212
6 REPLIES 6

keith_redfield
Valued Contributor II
In order for fingerprinting to work, the devices must be getting their IP addresses via DHCP. If they are set up that way, then please open a support case for further troubleshooting.

juan_6469136
New Contributor II
Yes, I have the DHCP Server of my Zonedirector disabled, but I have other one activated in a Linux Firewall.

Android devices get the IP with the DHCP of the Firewall, but I think this Android devices is blocked. The problem is with the Windows 7 computers that are also blocked with static IPs. And I only want to block Androids.

How could I do that?

Thanks.
PD: I think that the DHCP server of Ruckus is not the best way to give dynamic IPs.

keith_redfield
Valued Contributor II
It sounds like the WIndows 7 machines have static IP? If yes, then if you make them DHCP clients you should be able to get this working.

Ruckus doesn't have to be the DHCP server for client fingerprinting, but we do rely on DHCP snooping to detect the client information.

juan_6469136
New Contributor II
Thank you, I understand. I think is not possible to assign to all my Windows 7 DHCP, Then, is not possible to block in the same network Android devices or any DHCP devices mixed with Statics?