vSZ-D Network Configuration

[ross_halliday]

Hello,

I'm attempting to turn up a vSZ-D instance in my lab. I've got a pair of vSZ controllers running in a cluster, each with three interfaces (Management, Cluster, Control). The vSZ-D documentation is pretty bad, as it calls the one interface "Management/Control" and doesn't really say what it does, or really how it's supposed to connect to the vSZ controllers. I've tried it on both the "Management" and "Cluster" networks but I can't get it to connect. I have not tried it on the "Control" (which is Public) for the controllers as this is the same subnet as the "Data" interface should be on.

Also, I have no idea how the "Data" interface is supposed to work VLAN-wise. Is the IP I assigned just untagged?

Could someone share how theirs is configured and working? I would really appreciate it!

Thanks

[michael_brado]

Quick Setup Guide:  https://support.ruckuswireless.com/documents/972-vsz-d-quick-setup-guide-for-smartzone-3-2-1
Configuration Guide:  https://support.ruckuswireless.com/documents/971-vsz-d-smartzone-3-2-1-mr-configuration-guide

[ross_halliday]

Thanks for the reply Michael, I have already scoured those documents and they do not contain the information I need.

What network should the "Management" interface of the dataplane module be configured on, and what IP does it need to connect to the control plane one?

[michael_brado]

You might benefit more from a conversation with your locar VAR or Ruckus SE, as the entirety of virtual controller deployment and separate vitual Dataplane for tunnelled client traffic is a little more complex than simple ZoneDirector model.

[ross_halliday]

I am the VAR. I've reached out to our SE for any design documents he may have. This really should be covered in your manual...