cancel
Showing results for 
Search instead for 
Did you mean: 

hello i have R510 who lost the Smartzone controller. the hardreset does not work. solutions ?

patrick_redon
New Contributor
R510 hard reset don t work
3 REPLIES 3

diego_garcia_de
Contributor III
unless the AP and the controller are on the same subnet, a hard-reset wont work.

If the AP is hard-reset, connect to the AP using ssh or web and set its controller IP manually.

for the CLI its "set scg ip x.x.x.x" with the IP of the SCG.

you can also do "set scg syslog 0x888f" and then use "show syslog log"  to see if its able to contact the controller.

patrick_redon
New Contributor
ok thank but ssh and web acces don't work, only ping are responding

diego_garcia_de
Contributor III
Make sure you keep the reset button pressed until the power led starts flashing red. Only then release it. Otherwise you're just rebooting the AP

If that still fails I guess you might need an RMA