03-17-2023 09:33 AM
My icx 7150-c12p does not show any lights in status bar, no ports have lights, have tried other power outlets. unit is not getting power, power supply is bad????
How does this forum work? I see several other posts of power supply issues with same unit. I tried direct chat and was told to come to the Lennar support page, now what???
03-17-2023 10:25 AM - edited 03-17-2023 10:54 AM
Hi @Moc
Greetings!!!
Thank you for contacting Lennar Home Community.
Hope you are doing well!!!
As per the case description, I could understand that your ICX-7150-C12P Switch is not getting power.
Could you please check if the Switch power cord/cable is working or check with a different power cord/cable?
Could you please plug your ICX-7150-C12P Switch into a power outlet and send us a picture of it? Please refer to the below picture as an example.
Before uploading the photos please log in to the RUCKUS account and you can upload the image.
Please let me know if you have any queries in this regard.
Thank you again.
Best regards,
Imran Sanadi
Lennar Home Community.
03-18-2023 05:16 AM
Imran Sanadi,
Here is picture of unit plugged in to outlet.
I did try another power cord and still no status lights/power to unit.
Thank You, Moc
03-20-2023 08:29 AM
Hi @Moc
Greetings!!!
Thank you for the information you shared,
Please try to reset the Switch once as described below-
Reset the Switch as described below:
1. Please try to disconnect from the Power outlet the ICX-7150 and reconnect.
2. Please try to press the reset button using a paper click or a small stick
Below is the Guide and Videos link for your reference:
Video link: https://www.youtube.com/watch?v=6jHMTdo_hK4
Please let me know if you have any queries in this regard.
Thank you again for your patience.
Best regards,
Imran Sanadi
Lennar Home Community.
03-20-2023 01:56 PM
Imran Sanadi,
I watched video, followed steps to reset switch with no result. No lights flashed amber when holding reset button and plugging unit in. Did not see any thing happen (light up) with switch after trying several times.
Thanks,
MOC