cancel
Showing results for 
Search instead for 
Did you mean: 

Wireless Access Points

pmorales
New Contributor

WAPs have not powered up after having a power outage. Where do I start troubleshooting?

I followed reset instructions from other posts but still not working.  

 

6 REPLIES 6

Imran_ruckus
Moderator
Moderator

Hi @pmorales 

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS setup is not working, and Access Points do not have power after a power outage.

Please let us know the answer to the below query to assist you better.

On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports. 

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let me know the answer to the above query and let me know if you have any queries in this regard.

Thank you again for your patience.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

pmorales
New Contributor

IMG_6746.jpg

pmorales
New Contributor

WAPs have zero power.  I tried resetting switch several times.  

 

pmorales
New Contributor

Reset again and now all ambers are blinking and have been for 5 mins.