12-05-2022 03:32 PM
We've been having inconsistent or slow Wi-Fi in certain rooms (they're at the corners of the house, so not surprising). After troubleshooting, I've decided that adding a Ruckus access point may be a reasonable solution. But in trying that, I've encountered some hurdles and am hoping someone in the community or Ruckus could offer advice.
Thanks!
Kaz
12-09-2022 11:58 AM - edited 12-09-2022 11:59 AM
Hi @kaz
Is missing this one , Please include all command or output to review it
Show inline power
Best Regards
Fernando Vasquez
12-09-2022 12:16 PM
Hi @kaz
I saw the commands I checked and Power is disable on port 7 to 12 so lets run the following commands to enable this.
ICX7150-48ZP Router>enable
ICX7150-48ZP Router#configure terminal
Warning: 1 user(s) already in config mode.
ICX7150-48ZP Router(config)#interface ethernet 1/1/7 to 1/1/12
ICX7150-48ZP Router(config-mif-1/1/7-1/1/12)#inline power
that should enable the Power on the rest of the ports let us know the result !
Best Regards
Fernando Vasquez
04-29-2026 02:13 PM
04-29-2026 02:21 PM
Hi @ReikiRich
Greetings!!!
Thank you for reaching out to the RUCKUS Lennar Home Community and for your attention to this matter.
Should you have any questions or need assistance in the future, please don’t hesitate to contact us.
Wishing you a wonderful day ahead!
Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support
