Showing results for 
Search instead for 
Did you mean: 

Setting up Ruckus and at&t gateway together with same SSID

New Contributor II
I have a Lennar home with Ruckus r510 and ICX 7150 C12P. I am using it's SSID for all my wi-fi needs. I have internet through at&t and the gateway is also broadcasting a wi-fi SSID that is different than the Ruckus AP. Can I turn the wi-fi off on my gateway? Is this the correct configuration? I want the at&t gateway to have the same SSID so I can get extended do I set it up? Does my at&t gateway need to be the primary wi-fi and Ruckus be the bridge? or vice-versa? Also, when the Amazon guy activated the smart home he did not leave any user name and password to get into the Ruckus admin settings. I can get to the unleashed login page but the default user name super/sp-admin does not work. Please help!!!

Contributor III
Password & Usernames:
I would contact AMZN or the builder, let them know the tech neglected to give you the admin/pass for the system
ATT Router:
I recommend turning off the ATT Router's Wi-Fi, or only broadcasting a simple management WI-Fi should you need to jump in and do some administration. Power level control, intelligence, interference mitigation, and roaming cohesiveness is something the ATT unit will not participate in.

New Contributor II
I had a similair issue with access to Ruckus unleashed and Lennar shared that the username was admin and the password was Ruckus!   Obviously you should change them once you log in
Image_ images_messages_5f91c45c135b77e247a46699_d3f843fdc54db24a62147bbb487dd636_RackMultipart202006046318515s6-885e7e9d-04d7-458d-98d9-9deef8a3edb5-647021760.jpg1591282794

Tom, you are RAD!

Just FYI for anyone coming through here later, sometimes Lennar sets up the password to be "Lennar" (no quotes).