I just moved into a Lennar home with a Ruckus ICX-7150-C12 switch, and three Ruckus R510 WAPs. I have tried following the phone app instructions from this video, and using my laptop and this video, but haven't been successful.
I have ran into several issues along the way (particularly with the phone app), but here's where I am right now:
Using the laptop setup instructions, I was able to connect to one of the Configure.Me-xxxxxx Wi-Fi networks.
Was able to go over the 5 steps from the setup wizard and create a WLAN.
Managed to get the "Congratulations ! Unleashed Master is now configured !" screen.
I noticed that after doing this, the power LED in all three WAPs went from blinking green to solid green, and the 2.4 G and 5 G LEDs are now one (orange). the ctrl LED in the primary WAP is also solid green.
However, after all this was done, the WLAN SSID I set up was never broadcasted, so I couldn't continue the process. I tried to manually connect to it (in case it was hidden), but that didn't work.
The thing is that, now the Configure.Me-xxxxxx Wi-Fi network has now disappeared, so I don't have anything to connect to to try to configure things again.
I have fiber internet thru AT&T, so I have an BGW320-505 ONT directly connected to the ICX-7150-C12. If I go to my AT&T network app, I can see the ICX7150-C12-Switch and three Ruckus-Unleashed devices (for the WAPs I presume), so I believe all components are online (not sure this helps with the issue, but I figured I would mention the rest of the setup).
I read in a few places to try to connect my laptop to the ICX7150-C12 directly using an ethernet cable to setup/check the network from there. I tried connecting to one of the PoE ports and access 192.168.0.1, but that didn't work.
Any suggestions on where to go from here would be greatly appreciated.
When I moved into my house, I wasn't able to set up using the Configure.Me-xxxxxxx. Check the inside of your network cabinet. In the inside of the door was a sticker. It listed a "WiFi Name" Lennar-xxxxxxxx followed by the password.
I have fiber through Cox with a Nokia ONT (not sure of the model number) but shouldn't I be able to plug that ONT directly to my ICX7150-C08P instead of from the ONT, to the cox router/modem then into the Ruckus switch?
My home is broadcasting 2 different Wifi signals... 1 for cox and 1 for the WAPs in my home.
I've been going crazy trying to figure this out ever since I moved in.
Technically, yes. You have 2 options here really. Turn off WiFi in your Cox device if possible, or the solution you are seeking. I'd want to make sure you only have 1 WiFi network in your house, not 2.
However, I'd ensure you're running ICX software 8.0.90d first. You'll probably have to play with the configuration a bit, but not knowing how comfortable you are with the ICX config we can help if you have questions.