Ruckus not powering on - no led is lit including "PWR" led

[JPR]

Hi,
My Ruckus switch ICX 7150-C12P stopped working. The switch is powered but no led is ON. When I power ON the module, I see all the leds blink amber for a second and then all leds go back to off. I tried to reset to factory default multiple times (using the reset pin hole), and I still have the same result. I also tried to communicate with the switch via Putty/serial connection and the device is not communicating. Any idea how to fix it?

[Imran_ruckus · Accepted solution]

Hi @JPR 

Thank you for sharing the requested PICTURES and a VIDEO.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up, and when plugged in, it flashes amber lights for a second and then goes dark. And you confirm that the Switch is plugged into a well-known outlet/power source. However, the failure persists. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.

Please follow the steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[Imran_ruckus]

Hi @JPR 

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS ICX-7150-C12P Switch is not powering on.

Please plug your ICX-7150-C12P Switch into a working power outlet and send us PICTURES and VIDEO of it showing the light status, and cord connected to the Switch and a working power outlet. Please refer to the below pictures as an example.

Please use the below link to upload a VIDEO:

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Please let me know if you have any queries in this regard.

Thank you again for your patience. 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[JPR]

Hi Imran,

Thank you for your quick reply. I uploaded the video of the device when powering ON the device as well as pictures of the setup/device leds after the device is powered. Please let me know if you need more pictures/videos.

Thanks

Jerome

[Imran_ruckus · Accepted solution]

Hi @JPR 

Thank you for sharing the requested PICTURES and a VIDEO.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up, and when plugged in, it flashes amber lights for a second and then goes dark. And you confirm that the Switch is plugged into a well-known outlet/power source. However, the failure persists. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.

Please follow the steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[JPR · Accepted solution]

Imran,

Thank you for your help and being so responsive!

Jerome