Ruckus capped at 100mbps

[Bsedio19]

Ruckus hardwired to att modem w/ 500mbps speeds, wireless signal capped at 100mbps from Ruckus.

Amy ideas?

[Bsedio19]

Just to confirm, this is the model of switch I have

 

[Imran_ruckus]

Hi @Bsedio19

Thank you for the response and the update.

Yes, that is the correct Switch dashboard on the browser.

Apologies for the inconvenience caused.

To assist you further, please follow these steps:

1. Download the Putty application using the below link:

Putty download link:https://www.putty.org/

2. Attempt to access the CLI using Telnet without requiring a username/password. Please refer to the attached screenshot for guidance. 

Once accessed, execute the following commands and provide the outputs:
  - enable
  - show version
  - show flash
  - show inline power
  - show inline power detail
  - show interface brief

   - show ip address

    -show lldp neighbors detail

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[Imran_ruckus]

Hi @Bsedio19 

Please refer to my previous post and help me with the queries.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[Bsedio19]

Imran- I completed a factory reset and somehow the username and password still dod not work:

Username: super

Password: Sp-admin

[Bsedio19]

"sp-admin"