Ruckus R510 Slowness

[joseph_nguyen_g]

Ruckus R510 Slowness - My topology Comcast Xfinity X1 router with 1Gbps service, measuring 850Mbps as the output. This goes to a Rucker switch C12P, and the output there is 825Mbps. However, coming out of the 2 APs, even with AP to AP speedtest, its only 400Mbps. At remote location in my house, i am only getting 40Mbps. Troubleshooting with Lennar Home network specialist, everything pointed back to the 2 APs, Ruckus R510 Unleashed. What was the last known working FW version that supported full-duplex speedtest with results near max speed ~800Mbps+?

[joseph_nguyen_g]

ok, have to read up and refresh my memory on iPerf3.  Will do that with the other experiment you suggested and update here, later..
Btw, these are R510s Unleashed, not R510s Wave 2 Ruckus APs.

[andrew_giancol1]

um, wired to wired using iperf3. (Baseline)
wired to wireless doing using iperf3
wireless to wireless ( same AP) using iperf3
wireless to wireless (Adjacent APs) using iperf3
I'm doing my tests now!!!

[joseph_nguyen_g]

i dont have usb-c adaptor on my laptop for Ethernet.  I was using it earlier from the Lennar guy.

[joseph_nguyen_g]

btw, do you have the command that you want me to user with iPerf3 handy?

[andrew_giancol1]

Wired server to wired client - 94.4mbit / 94.7mbit (wired client is 100mb/s max both client and server are on a NETONIX WS-8-250-AC)
wired server to a wireless client - 780mbit / 533mbit (i can download faster from the server then I can send)
Wireless to Wireless (i only have a single AP here) 117mbit / 68mbit (Linksys AE3000 on the server)
I hope that helps in some way.