Ruckus R510 Slowness

[joseph_nguyen_g]

Ruckus R510 Slowness - My topology Comcast Xfinity X1 router with 1Gbps service, measuring 850Mbps as the output. This goes to a Rucker switch C12P, and the output there is 825Mbps. However, coming out of the 2 APs, even with AP to AP speedtest, its only 400Mbps. At remote location in my house, i am only getting 40Mbps. Troubleshooting with Lennar Home network specialist, everything pointed back to the 2 APs, Ruckus R510 Unleashed. What was the last known working FW version that supported full-duplex speedtest with results near max speed ~800Mbps+?

[andrew_giancol1]

I've got an R610 with unleashed here, I'll play with that too.

[joseph_nguyen_g]

Hi Andrew any updates on your end? I had to downgrade back to 200.6. But I am still getting like 50Mbps at times paying for 1Gbps. it's a Fuckus APs I now called it:)

[hayward_kong]

Did you try downgrading to 200.4.x?

[joseph_nguyen_g]

no, just from 200.7 to 200.6. heard 200.8 is buggy. so hoping for 200.9 soon. 200.4 is rock solid? else dont want to go so far back.

[tyler_riddle_6u]

This seems about right. According to the specs, it should get theoretically 867 Mbps. This assumes a Wave 2 device capable of utilizing 80 Mhz channelization on 5ghz. 

https://www.ruckuswireless.com/products/access-points/ruckus-indoor/ruckus-r510

When it comes to WiFi, take the spec, cut it in half and generally you'll get your real life throughput.  Sure there might be Firmware issue, but... this seems normal.
Are you sure you are using 5ghz on all your devices?  Maybe try disabling 2.4 so you are getting a more isolated test.