Ruckus R510 Slowness

[joseph_nguyen_g]

Ruckus R510 Slowness - My topology Comcast Xfinity X1 router with 1Gbps service, measuring 850Mbps as the output. This goes to a Rucker switch C12P, and the output there is 825Mbps. However, coming out of the 2 APs, even with AP to AP speedtest, its only 400Mbps. At remote location in my house, i am only getting 40Mbps. Troubleshooting with Lennar Home network specialist, everything pointed back to the 2 APs, Ruckus R510 Unleashed. What was the last known working FW version that supported full-duplex speedtest with results near max speed ~800Mbps+?

[andrew_giancol1]

I agree with you. Best of luck!

[joseph_nguyen_g]

The only problem is the older firmware comes with a known bug of range fluctuations... So, now I am getting anywhere between 40Mbps-400Mbps in the main area of the house. Latest firmware was 40Mbps-170Mbps

[joseph_nguyen_g]

In general, i've been fighting this issue for the past 6 months(since May) since I moved into my new smart home. Being a software & electronics person myself, working in the high tech industry for 32 years, i do not have a warm and fuzzy on this product.  I do not recommend this product to anyone, the way it was thrown into the market unreliable and full of bug.  I wish they address these issues, of bandwidth, range and stability in new firmware soon.... I just wish they would give me the latest and greatest product to drop in place of the R510 Unleashed, since they put a faulty designed devices in my new house... I've spent endless hours, and now with Lennar Network specialist, i am confidence to say this is a truly fault-fully designed product.

[andrew_giancol1]

Have you tried Stand Alone firmware?  Also, if you've got an extra box, why not plug into your 12C with 1gb ETH and run IPERF3, this may help at least bring your internet out of the testing.

[joseph_nguyen_g]

Yes, i have an extra router, i can do that and update you.