11-01-2024 06:34 PM
Hello,
We have a Ruckus R510 that is no longer powering on. We took it off the ceiling mount and tested it with an AC power adapter, and it still won’t power on. Can someone please help?
11-04-2024 04:11 AM
Hi @CBiancoWhite
Greetings!!!
Thank you for reaching out to the RUCKUS Lennar Home Community.
I hope this message finds you well.
We appreciate the information you provided regarding your RUCKUS R510 Access Point not powering on.
To proceed, we kindly request that you follow the steps outlined below:
We kindly request that you connect your RUCKUS R510 Access Point (AP) to a functional power outlet and share both pictures and a single video showcasing the light status, the cord connected to the APs, and its connection to a working power outlet. Please refer to the example pictures provided below for guidance.
For the video upload, we have created a designated link for your convenience. You can access it via the following link: (Refer to the EXAMPLE VIDEOS from this drive link)
Kindly shoot a video similar to the EXAMPLE Video provided in the link.
In the video, please ensure to capture the following:
1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.
2. Simultaneously, display the light status on the switch.
https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing
If you have any questions or need further clarification, please don't hesitate to reach out.
Thank you once again for your patience and cooperation.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.