cancel
Showing results for 
Search instead for 
Did you mean: 

Router has failed

Haso
New Contributor

My ICX7150-C12P-2X1G router has failed. No POE to ring door bell or WIFI on celling. No power over ethernet to ruckus wifi on ceiling or to doorbell.

How do I get a replacement?.

1 REPLY 1

pinky_ruckus
Moderator
Moderator

Hi @Haso 

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS Switch is not working and devices are not connecting.

Could you please let us know the answers to the below queries to assist you better?

1)  Was there any power outage before you started facing this issue?

2)    On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports)

3)  Is your Internet Connection from the Internet Service Provider (ISP) stable and working? (You could check this by connecting to your local router Wi-Fi or from an ethernet cable from the Router to a laptop/PC).

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports. Also, light the status of Access Points.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

 

 

 

Please let us know the answers to ALL the above queries or let us know if you have any queries in this regard.

Thank you again for your patience.

 

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.